AddPac VoiceFinder AP1100 Especificações Página 179
- Página / 416
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 179 / 416-
3.6. Configuring FAX Applications
3.6.1. H.323 or SIP-Based T.38 FAX Relay
T.38 Fax Relay feature used from H.323 protocol is the standard based Fax Relay Protocol
which is supported by VoiceFinder Gateway and most of other gateways or routers.
For VoIP gateway to use fax relay, the configuration for voice routers and gateways need to be
changed to T.38 protocol.
The following shows IP H.323 network, which is composed of VoiceFinder Gateway and the
companies with gateways and gatekeepers in different locations, using T.38 fax relay feature.
By using T.38, all the gateways and gatekeepers in this network can send fax to other offices in
remote locations
Figure 3.10 IP Network for T.38 FAX Relay
A voice call is established when the gateway transmits fax. The transmitting gateway detects
fax tone which is generated from the fax response, and then it starts T.38 Mode Request by
processing H.245. At this time, the receiving side recognizes T.38 Mode Request and terminates
the voice channel. After terminates the voice channel it opens T.38 Fax Relay Channel.
IP Network
C
ompany
A
Office 1
C
ompany
B
Office 1
C
ompany
B
Office 2
C
ompany
A
Office 2
GK or Proxy
Alternate
GK or Proxy
Third-party T.38
Gateway
AP1100 VoIP
Gateway
AP1100 VoIP
Gateway
Gateway
- VoiceFinder 1
- - 2 / 416 2
- [CONTENTS] 3
- - 4 / 416 4
- - 5 / 416 5
- - 6 / 416 6
- - 7 / 416 7
- - 8 / 416 8
- - 9 / 416 9
- - 10 / 416 10
- [TABLES] 11
- [FIGURES] 12
- Preface – About This Guide 13
- - 14 / 416 14
- - 15 / 416 15
- [Document Conventions] 16
- [Safety Warnings] 16
- Warning 16
- Chapter 1 . Overview 17
- VoiceFinder Gateways 18
- 1.2. Main Features 19
- IP Routing Protocols 20
- Voice over IP Service 20
- WAN Service 20
- Network Managements 20
- Security Functions 21
- Operation and Managements 21
- Other Scalability Features 21
- Interoperability Features 22
- - 24 / 416 24
- - 26 / 416 26
- - 27 / 416 27
- 2.2. Command Instructions 28
- - 30 / 416 30
- 2.2.1. User Mode Commands 31
- Command Description 32
- - 34 / 416 34
- - 35 / 416 35
- Commands Description 36
- Configuration Mode) 37
- 2.2.5.2. voice-port Commands 40
- - 41 / 416 41
- 2.2.5.3. Pots peer Commands 42
- 2.2.5.4. Voip peer Commands 43
- - 44 / 416 44
- 2.2.5.5. Gateway Commands 45
- 2.2.5.6. sip-ua Commands 46
- - 47 / 416 47
- 2.2.5.7. mgcp Commands 48
- [Usage Procedure ] 49
- Steps Workflow Description 49
- 2.4. Configuring Ethernet 50
- - 51 / 416 51
- - 52 / 416 52
- - 53 / 416 53
- 2.4.2. Configuring PPPoE 54
- [Usage Procedure] 55
- - 56 / 416 56
- - 57 / 416 57
- - 58 / 416 58
- 2.5. Routing Configuration 60
- - 61 / 416 61
- - 63 / 416 63
- - 66 / 416 66
- - 67 / 416 67
- - 68 / 416 68
- - 69 / 416 69
- [NAT Acronyms] 71
- - 73 / 416 73
- - 74 / 416 74
- - 75 / 416 75
- Protocol) 76
- Mandatory Commands 78
- Steps Workflow Description 78
- - 79 / 416 79
- - 80 / 416 80
- - 82 / 416 82
- - 83 / 416 83
- - 84 / 416 84
- 2.10. Configuring IP Share 85
- - 87 / 416 87
- Environment 88
- - 90 / 416 90
- [Usage Example] 92
- [Related Commands] 92
- - 93 / 416 93
- 2.12. Configuring PPTP 94
- - 95 / 416 95
- 2.13. Configuring SNMP 96
- - 98 / 416 98
- - 99 / 416 99
- - 100 / 416 100
- 2.14.1. EXEC Mode Commands 101
- - 102 / 416 102
- - 103 / 416 103
- - 104 / 416 104
- [Command Format and Options] 105
- - 106 / 416 106
- - 107 / 416 107
- - 108 / 416 108
- - 109 / 416 109
- - 110 / 416 110
- - 111 / 416 111
- - 112 / 416 112
- - 113 / 416 113
- - 114 / 416 114
- - 115 / 416 115
- 2.15.1. Logging Commands 116
- 2.15.2. Show Commands 117
- - 118 / 416 118
- - 119 / 416 119
- - 120 / 416 120
- Caution 121
- - 122 / 416 122
- - 123 / 416 123
- Files Management 124
- 2.16.2. Password Recovery 125
- - 126 / 416 126
- - 127 / 416 127
- - 128 / 416 128
- - 129 / 416 129
- - 131 / 416 131
- 2.17. Auto-Upgrade 133
- - 134 / 416 134
- Commands 135
- - 136 / 416 136
- - 137 / 416 137
- 3.1.3. Dial Peer 138
- - 139 / 416 139
- 3.1.4. Voice Port 140
- Information 141
- Dial Peer 142
- IP Cloud 143
- Destination 143
- - 145 / 416 145
- - 146 / 416 146
- - 147 / 416 147
- - 148 / 416 148
- 3.3.4. Hunt Group 150
- - 151 / 416 151
- 3.3.4.2. Rerouting to PSTN 152
- 3.3.4.3. Call bar 153
- - 154 / 416 154
- - 155 / 416 155
- Gateway 155
- - 156 / 416 156
- - 157 / 416 157
- - 158 / 416 158
- - 159 / 416 159
- - 160 / 416 160
- - 161 / 416 161
- 3.3.8.1. call-diversion 162
- 3.3.8.2. max-forward-hop 163
- - 164 / 416 164
- - 165 / 416 165
- - 166 / 416 166
- 3.3.12.1. busyout monitor 167
- 3.3.12.2. busyout action 167
- - 168 / 416 168
- - 169 / 416 169
- - 170 / 416 170
- - 171 / 416 171
- 60 PIN CONNECTOR 172
- RJ45_4PORT 172
- - 173 / 416 173
- - 174 / 416 174
- - 175 / 416 175
- 3.5.2. Common Configuration 176
- - 177 / 416 177
- 3.5.4. Configuring R2 178
- - 179 / 416 179
- - 180 / 416 180
- 3.7.1. ftp 181
- 3.7.2. http 181
- 3.7.3. ntp 182
- 3.7.4. snmp 182
- 3.7.5. telnet 183
- - 184 / 416 184
- - 185 / 416 185
- - 186 / 416 186
- - 187 / 416 187
- - 188 / 416 188
- - 189 / 416 189
- 3.10. VoIP Related commands 190
- 3.10.2.1.1. Syntax 196
- 3.10.2.1.2. Command Default 196
- 3.10.2.1.3. Command Modes 196
- 3.10.2.1.4. Usage Guidelines 196
- 3.10.2.1.5. Examples 196
- 3.10.2.2.1. Syntax 197
- 3.10.2.2.2. Command Default 197
- 3.10.2.2.3. Command Modes 197
- 3.10.2.2.4. Usage Guidelines 197
- 3.10.2.2.5. Examples 197
- 3.10.2.3.1. Syntax 198
- 3.10.2.3.2. Command Default 198
- 3.10.2.3.3. Command Modes 198
- 3.10.2.3.4. Usage Guidelines 198
- 3.10.2.3.5. Examples 198
- 3.10.2.4. dial-peer hunt 199
- 3.10.2.4.5. Examples 200
- 3.10.2.5.1. Syntax 201
- 3.10.2.5.2. Command Default 201
- 3.10.2.5.3. Command Modes 201
- 3.10.2.5.4. Usage Guidelines 201
- 3.10.2.5.5. Examples 201
- - 202 / 416 202
- * 10 * 0 * 0 * 1 * 1234 # 202
- * 10 * 0 * 0 * 1 # 202
- - 203 / 416 203
- 3.10.2.7. dial-peer voice 204
- 3.10.2.8. gateway 205
- 3.10.2.9. num-exp 206
- 3.10.2.9.1. Syntax 207
- 3.10.2.9.2. Command Default 207
- 3.10.2.9.3. Command Modes 207
- 3.10.2.9.4. Usage Guidelines 207
- 3.10.2.10. translation-rule 209
- 3.10.2.11. voice-port 210
- - 211 / 416 211
- 3.10.2.12.2. Command Default 212
- 3.10.2.12.3. Command Modes 212
- 3.10.2.12.5. Examples 212
- - 213 / 416 213
- 3.10.2.13.1. Command Default 214
- 3.10.2.13.2. Command Modes 214
- 3.10.2.13.4. Examples 214
- - 215 / 416 215
- 3.10.2.14.1. Syntax 216
- 3.10.2.14.2. Command Default 216
- 3.10.2.14.3. Command Modes 216
- 3.10.2.14.5. Examples 217
- 3.10.2.15.1. Syntax 218
- 3.10.2.15.2. Command Default 218
- 3.10.2.15.3. Command Modes 218
- - 219 / 416 219
- 3.10.2.15.5. Examples 220
- 3.10.2.16. voice service 221
- 3.10.2.17. voip-interface 222
- 3.10.3.1. announcement 223
- 3.10.3.2. busyout action 224
- 3.10.3.3. busyout backup 225
- 3.10.3.4. caller-id 226
- - 227 / 416 227
- caller-id enable 227
- caller-id type bellcore 227
- 3.10.3.5. comfort-noise 228
- 3.10.3.6. connection plar 229
- - 230 / 416 230
- 3.10.3.7. connection trunk 231
- - 232 / 416 232
- 3.10.3.8.1. Syntax 233
- 3.10.3.8.2. Command Default 233
- 3.10.3.8.3. Command Modes 233
- 3.10.3.8.4. Usage Guidelines 233
- 3.10.3.8.5. Examples 233
- 3.10.3.9. did 234
- 3.10.3.9.5. Examples 235
- 3.10.3.10. echo-cancel 236
- 3.10.3.11. fax-early-detect 237
- 3.10.3.12. high-dtmf-gain 238
- 3.10.3.13. input gain 239
- 3.10.3.13.5. Examples 240
- 3.10.3.14. low-dtmf-gain 241
- 3.10.3.15. output gain 242
- 3.10.3.15.5. Examples 243
- 3.10.3.16. polarity-inverse 244
- 3.10.3.17. pstn-backup-port 245
- 3.10.3.17.5. Examples 246
- 3.10.3.18. ring number 247
- 3.10.3.18.5. Examples 248
- 3.10.3.19.1. Syntax 249
- 3.10.3.19.2. Command Default 249
- 3.10.3.19.3. Command Modes 249
- 3.10.3.19.5. Examples 249
- 3.10.3.20. timeout 250
- 3.10.3.20.5. Examples 251
- 3.10.3.21.1. Syntax 252
- 3.10.3.21.2. Command Default 252
- 3.10.3.21.3. Command Modes 252
- 3.10.3.21.5. Examples 252
- - 253 / 416 253
- rule 1 8 878 253
- 3.10.4.1. answer-address 254
- 3.10.4.1.5. Examples 255
- 3.10.4.2. codec 256
- 3.10.4.2.5. Examples 257
- 3.10.4.3.1. Syntax 258
- 3.10.4.3.2. Command Default 258
- 3.10.4.3.3. Command Modes 258
- 3.10.4.3.4. Usage Guidelines 258
- 3.10.4.3.5. Examples 258
- 3.10.4.4.1. Syntax 259
- 3.10.4.4.2. Command Default 259
- 3.10.4.4.3. Command Modes 259
- 3.10.4.4.4. Usage Guidelines 259
- 3.10.4.4.5. Examples 260
- 3.10.4.5. diversion 261
- 3.10.4.6. display-name 262
- - 263 / 416 263
- user-name addpac_user 263
- display-name addpac_user 263
- 3.10.4.7. dtmf-relay 264
- 3.10.4.7.5. Examples 265
- 3.10.4.8. forward-digits 266
- 3.10.4.8.5. Examples 267
- 3.10.4.9. huntstop 268
- 3.10.4.10. port 269
- 3.10.4.11. preference 270
- - 271 / 416 271
- 3.10.4.12. prefix 272
- 3.10.4.13. register 273
- 3.10.4.13.5. Examples 274
- 3.10.4.14. session target 275
- 3.10.4.15.1. Syntax 276
- 3.10.4.15.2. Command Default 276
- 3.10.4.15.3. Command Modes 276
- 3.10.4.15.5. Examples 276
- 3.10.4.16. sid 277
- 3.10.4.17.1. Syntax 278
- 3.10.4.17.2. Command Default 278
- 3.10.4.17.3. Command Modes 278
- 3.10.4.17.5. Examples 278
- - 279 / 416 279
- 3.10.4.18. vad 280
- 3.10.4.19.1. Syntax 281
- 3.10.4.19.2. Command Default 281
- 3.10.4.19.3. Command Modes 281
- 3.10.4.19.5. Examples 281
- 3.10.4.20. user-name 282
- 3.10.4.20.5. Examples 283
- 3.10.4.21. user-password 284
- - 285 / 416 285
- 3.10.4.22.1. Syntax 286
- 3.10.4.22.2. Command Default 286
- 3.10.4.22.3. Command Modes 286
- 3.10.4.22.5. Examples 287
- 3.10.4.23. call-wafting 288
- - 289 / 416 289
- 3.10.4.24. out-barred-group 290
- - 291 / 416 291
- 3.10.5.1.1. Syntax 292
- 3.10.5.1.2. Command Default 292
- 3.10.5.1.3. Command Modes 292
- 3.10.5.1.4. Usage Guidelines 292
- 3.10.5.1.5. Examples 293
- 3.10.5.2. conference-server 294
- 3.10.5.3. enable-ping 295
- 3.10.5.3.5. Examples 296
- 3.10.5.4. media-channel 297
- 3.10.5.4.5. Examples 298
- 3.10.5.5. min-se 299
- 3.10.5.5.5. Examples 300
- 3.10.5.6. register 301
- 3.10.5.6.5. Examples 302
- 3.10.5.7. rel1xx 303
- - 304 / 416 304
- 3.10.5.9. retrycounter 305
- 3.10.5.10. remote-party-id 306
- 3.10.5.10.1. Syntax 307
- 3.10.5.10.2. Command Default 307
- 3.10.5.10.3. Command Modes 307
- 3.10.5.10.5. Examples 307
- 3.10.5.11. response 308
- 3.10.5.11.1. Syntax 309
- 3.10.5.11.2. Command Default 309
- 3.10.5.11.3. Command Modes 309
- 3.10.5.11.5. Examples 309
- 3.10.5.13. set-local-domain 310
- 3.10.5.13.1. Syntax 311
- 3.10.5.13.2. Command Default 311
- 3.10.5.13.3. Command Modes 311
- 3.10.5.13.5. Examples 311
- 3.10.5.14. set-local-host 312
- 3.10.5.14.5. Examples 313
- 3.10.5.15. signaling-port 314
- 3.10.5.16. force-forwarding 315
- 3.10.5.17. sip-server 317
- 3.10.5.17.5. Examples 318
- 3.10.5.18. sip-username 319
- 3.10.5.19. sip-password 320
- 3.10.5.20. srv 320
- 3.10.5.20.1. Syntax 321
- 3.10.5.20.2. Command Default 321
- 3.10.5.20.3. Command Modes 321
- 3.10.5.20.5. Examples 321
- 3.10.5.21. timeout 322
- 3.10.5.21.5. Examples 323
- 3.10.5.22. user-register 324
- 3.10.5.22.5. Examples 327
- 3.10.5.23.1. Syntax 328
- 3.10.5.23.2. Command Default 328
- 3.10.5.23.3. Command Modes 328
- 3.10.5.23.5. Examples 328
- Configuration Commands 329
- 3.10.6.1. announcement 329
- 3.10.6.2. busyout monitor 330
- 3.10.6.3. codec preference 331
- 3.10.6.4. counter 332
- 3.10.6.5. discovery 333
- 3.10.6.6. fax protocol 334
- - 335 / 416 335
- 3.10.6.7. fax rate 336
- 3.10.6.7.5. Examples 337
- 3.10.6.8.1. Syntax 338
- 3.10.6.8.2. Command Default 338
- 3.10.6.8.3. Command Modes 338
- 3.10.6.8.4. Usage Guidelines 338
- 3.10.6.8.5. Examples 338
- 3.10.6.9. force-starth245 339
- 3.10.6.10.1. Syntax 340
- 3.10.6.10.2. Command Default 340
- 3.10.6.10.3. Command Modes 340
- 3.10.6.10.5. Examples 340
- 3.10.6.11.1. Syntax 341
- 3.10.6.11.2. Command Default 341
- 3.10.6.11.3. Command Modes 341
- 3.10.6.11.5. Examples 341
- 3.10.6.12.1. Syntax 342
- 3.10.6.12.2. Command Default 342
- 3.10.6.12.3. Command Modes 342
- 3.10.6.12.5. Examples 343
- 3.10.6.13.1. Syntax 344
- 3.10.6.13.2. Command Default 344
- 3.10.6.13.3. Command Modes 344
- 3.10.6.13.5. Examples 345
- 3.10.6.14. max-frame 346
- 3.10.6.14.5. Examples 347
- 3.10.6.15. gkip 348
- 3.10.6.15.5. Examples 349
- 3.10.6.16. h323-id 350
- 3.10.6.17. lightweight-irr 351
- 3.10.6.18.1. Syntax 352
- 3.10.6.18.2. Command Default 352
- 3.10.6.18.3. Command Modes 352
- 3.10.6.18.5. Examples 353
- - 354 / 416 354
- - 355 / 416 355
- 3.10.6.20. max-digits 356
- 3.10.6.21. password 357
- 3.10.6.22. public-ip 358
- 3.10.6.23. register 359
- - 360 / 416 360
- 3.10.6.24. signaling-port 361
- 3.10.6.25. rule 362
- 3.10.6.25.5. Examples 363
- 3.10.6.26.1. Syntax 364
- 3.10.6.26.2. Command Default 364
- 3.10.6.26.3. Command Modes 364
- 3.10.6.26.4. Examples 364
- 3.10.6.27. acf-dest-info 365
- 3.10.6.28.1. Syntax 366
- 3.10.6.28.2. Command Default 366
- 3.10.6.28.3. Command Modes 366
- 3.10.6.28.5. Examples 367
- 3.10.6.29.1. Syntax 368
- 3.10.6.29.2. Command Default 368
- 3.10.6.29.3. Command Modes 368
- 3.10.6.29.5. Examples 368
- 3.10.6.30.1. Syntax 369
- 3.10.6.30.2. Command Default 369
- 3.10.6.30.3. Command Modes 369
- 3.10.6.30.5. Examples 369
- 3.10.6.31. timeout 370
- 3.10.6.31.3. Command Modes 371
- 3.10.6.31.5. Examples 371
- 3.10.6.32.1. Syntax 372
- 3.10.6.32.2. Command Default 372
- 3.10.6.32.3. Command Modes 372
- 3.10.6.32.5. Examples 372
- 3.10.6.33.1. Syntax 373
- 3.10.6.33.2. Command Default 373
- 3.10.6.33.3. Command Modes 373
- 3.10.6.33.5. Examples 373
- 3.10.6.34.1. Syntax 374
- 3.10.6.34.2. Command Default 374
- 3.10.6.34.3. Command Modes 374
- 3.10.6.34.5. Examples 375
- 3.10.6.35.1. Syntax 376
- 3.10.6.35.2. Command Default 376
- 3.10.6.35.3. Command Modes 376
- 3.10.6.35.5. Examples 376
- 3.10.7. Other Commands 377
- 3.10.7.1. clear h323 call 377
- 3.10.7.2. clear voice-port 378
- 3.10.7.3.1. Syntax 379
- 3.10.7.3.2. Command Default 379
- 3.10.7.3.3. Command Modes 379
- 3.10.7.3.4. Usage Guidelines 379
- 3.10.7.3.5. Examples 379
- 3.10.7.4.1. Syntax 380
- 3.10.7.4.2. Command Default 380
- 3.10.7.4.3. Command Modes 380
- 3.10.7.4.4. Usage Guidelines 380
- 3.10.7.4.5. Examples 380
- 3.10.7.5.1. Syntax 381
- 3.10.7.5.2. Command Default 381
- 3.10.7.5.3. Command Modes 381
- 3.10.7.5.4. Usage Guidelines 381
- 3.10.7.5.5. Examples 381
- 3.10.7.6.1. Syntax 382
- 3.10.7.6.2. Command Default 382
- 3.10.7.6.3. Command Modes 382
- 3.10.7.6.4. Examples 382
- 3.10.7.7. show dial-peer 383
- 3.10.7.8.1. Syntax 384
- 3.10.7.8.2. Command Default 384
- 3.10.7.8.3. Command Modes 384
- 3.10.7.8.4. Usage Guidelines 384
- 3.10.7.8.5. Examples 384
- 3.10.7.9.1. Syntax 385
- 3.10.7.9.2. Command Default 385
- 3.10.7.9.3. Command Modes 385
- 3.10.7.9.4. Usage Guidelines 385
- 3.10.7.9.5. Examples 385
- 3.10.7.10. show gateway 386
- 3.10.7.11. show num-exp 387
- 3.10.7.12.1. Syntax 388
- 3.10.7.12.2. Command Default 388
- 3.10.7.12.3. Command Modes 388
- 3.10.7.12.5. Examples 388
- 3.10.7.13. show user-class 389
- 3.10.7.14.1. Syntax 390
- 3.10.7.14.2. Command Default 390
- 3.10.7.14.3. Command Modes 390
- 3.10.7.14.5. Examples 390
- 3.10.7.15.1. Syntax 391
- 3.10.7.15.2. Command Default 391
- 3.10.7.15.3. Command Modes 391
- 3.10.7.15.5. Examples 391
- 3.10.7.16.1. Syntax 392
- 3.10.7.16.2. Command Default 392
- 3.10.7.16.3. Command Modes 392
- 3.10.7.16.5. Examples 392
- 3.10.7.17.5. Examples 394
- Appendix B References 400
- - 401 / 416 401
- - 402 / 416 402
- - 403 / 416 403
- - 404 / 416 404
- - 405 / 416 405
- - 406 / 416 406
- - 407 / 416 407
- - 408 / 416 408
- - 409 / 416 409
- - 410 / 416 410
- Examples are banks that 411
- - 412 / 416 412
- - 413 / 416 413
- - 414 / 416 414
- - 415 / 416 415
- - 416 / 416 416
Manuais e produtos relacionados com Gateways/controladores AddPac VoiceFinder AP1100
(68 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.484 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais