AddPac VoiceFinder AP1100 Especificações descarregar pdf (Página 73)

VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1

AddPac Technology Co., LTD

- 73 / 416-

inside private ip address takes the public ip address to communicate with the outside.

z ip nat <inside/pool/translation><destination/source><list/static><num/word

interface/pool><dialer/fastethernet><slot/port><overload|cr>

1. Configure NAT for the inside packet to go out to the outside.

2. inside : Configure to specify the inside network

3. list : Specify a list to be mapped with access-list. If the list does not match with the

number of access-list, then nat configuration does not operate.

4. Specify an interface for the inside packet applied with NAT configuration to be sent out

to the outside

z ip dhcp pool <WORD>.

1. Specify dhcp feature to active/de-active from global configuration location.

z network FastEthernet <interface-id>

1. Specify a local interface

2. interface id: ID of FastEthernet interface (0~1).

z range FastEthernet <interface-id>

1. Specify a network side interface

2. interface id: ID of FastEthernet interface (0~1).

z show running-config

Display the settings including NAT configuration

[Usage Example] NAT – DHCP Configuration and Usage Example

model name# config terminal

model name(config)#

☞ NAT-list Config can be started from this status

model name(config)# ip nat inside source list 1 interface

FastEthernet0/0 overload ☞ Configure NAT so the inside packet can be

sent to the outside

model name(config)# access-list 1 permit 10.1.1.0 0.0.0.255 ☞

Apply the ip included in the inside ip address of 10.1.1.0/24 to standard access-list

model name(config)# ip dhcp pool addpac ☞ Configure dhcp mode for

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 415 416

Sem comentários

AddPac VoiceFinder AP1100 Especificações Página 73