AddPac VoiceFinder AP1100 Especificações Página 294
- Página / 416
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
VoiceFinder VoIP Gateway Configuration Guide (APOS 2.0) Release Version 3.1
AddPac Technology Co., LTD
- 294 / 416-
3.10.5.2. conference-server
Conference call allows having a telephone conversation with more than 3 phone users on one call.
The AddPac VoiceFinder Series does not support conference call by themselves, but with a
conference server.
To interoperate with conference server, use conference-server. To disable this configuration, use
the no form of this command.
conference-server STRING <0-65535>
no conference-server
3.10.5.2.1. Syntax
Keyword / Argument Description
string Enter ID(name) to SIP Conference
<0-65535> Specify a port to communicate with SIP conference server
3.10.5.2.2. Command Default
No default behavior or value
3.10.5.2.3. Command Modes
SIP configuration
3.10.5.2.4. Usage Guidelines
To use conference call feature, configure dial-peer call-transfer h and dial-peer-call-hold h first.
Use hook-flash-button on the telephone for this feature.
Different from call-transfer, you need to press hook-flash button twice for conference call.
Basically, it takes 500 ms (0.5 sec) to recognize hook-flash button from the AddPac gateway
If you think 500ms (0.5 sec) is too short, you can change hook-flash detect timeout value when
hook-flash duration time of PBX is more than 500ms.
3.10.5.2.5. Examples
The following example configures conference server from SIP configuration:
sip-ua
conference-server mcu.addpac.com 5060
- VoiceFinder 1
- - 2 / 416 2
- [CONTENTS] 3
- - 4 / 416 4
- - 5 / 416 5
- - 6 / 416 6
- - 7 / 416 7
- - 8 / 416 8
- - 9 / 416 9
- - 10 / 416 10
- [TABLES] 11
- [FIGURES] 12
- Preface – About This Guide 13
- - 14 / 416 14
- - 15 / 416 15
- [Document Conventions] 16
- [Safety Warnings] 16
- Warning 16
- Chapter 1 . Overview 17
- VoiceFinder Gateways 18
- 1.2. Main Features 19
- IP Routing Protocols 20
- Voice over IP Service 20
- WAN Service 20
- Network Managements 20
- Security Functions 21
- Operation and Managements 21
- Other Scalability Features 21
- Interoperability Features 22
- - 24 / 416 24
- - 26 / 416 26
- - 27 / 416 27
- 2.2. Command Instructions 28
- - 30 / 416 30
- 2.2.1. User Mode Commands 31
- Command Description 32
- - 34 / 416 34
- - 35 / 416 35
- Commands Description 36
- Configuration Mode) 37
- 2.2.5.2. voice-port Commands 40
- - 41 / 416 41
- 2.2.5.3. Pots peer Commands 42
- 2.2.5.4. Voip peer Commands 43
- - 44 / 416 44
- 2.2.5.5. Gateway Commands 45
- 2.2.5.6. sip-ua Commands 46
- - 47 / 416 47
- 2.2.5.7. mgcp Commands 48
- [Usage Procedure ] 49
- Steps Workflow Description 49
- 2.4. Configuring Ethernet 50
- - 51 / 416 51
- - 52 / 416 52
- - 53 / 416 53
- 2.4.2. Configuring PPPoE 54
- [Usage Procedure] 55
- - 56 / 416 56
- - 57 / 416 57
- - 58 / 416 58
- 2.5. Routing Configuration 60
- - 61 / 416 61
- - 63 / 416 63
- - 66 / 416 66
- - 67 / 416 67
- - 68 / 416 68
- - 69 / 416 69
- [NAT Acronyms] 71
- - 73 / 416 73
- - 74 / 416 74
- - 75 / 416 75
- Protocol) 76
- Mandatory Commands 78
- Steps Workflow Description 78
- - 79 / 416 79
- - 80 / 416 80
- - 82 / 416 82
- - 83 / 416 83
- - 84 / 416 84
- 2.10. Configuring IP Share 85
- - 87 / 416 87
- Environment 88
- - 90 / 416 90
- [Usage Example] 92
- [Related Commands] 92
- - 93 / 416 93
- 2.12. Configuring PPTP 94
- - 95 / 416 95
- 2.13. Configuring SNMP 96
- - 98 / 416 98
- - 99 / 416 99
- - 100 / 416 100
- 2.14.1. EXEC Mode Commands 101
- - 102 / 416 102
- - 103 / 416 103
- - 104 / 416 104
- [Command Format and Options] 105
- - 106 / 416 106
- - 107 / 416 107
- - 108 / 416 108
- - 109 / 416 109
- - 110 / 416 110
- - 111 / 416 111
- - 112 / 416 112
- - 113 / 416 113
- - 114 / 416 114
- - 115 / 416 115
- 2.15.1. Logging Commands 116
- 2.15.2. Show Commands 117
- - 118 / 416 118
- - 119 / 416 119
- - 120 / 416 120
- Caution 121
- - 122 / 416 122
- - 123 / 416 123
- Files Management 124
- 2.16.2. Password Recovery 125
- - 126 / 416 126
- - 127 / 416 127
- - 128 / 416 128
- - 129 / 416 129
- - 131 / 416 131
- 2.17. Auto-Upgrade 133
- - 134 / 416 134
- Commands 135
- - 136 / 416 136
- - 137 / 416 137
- 3.1.3. Dial Peer 138
- - 139 / 416 139
- 3.1.4. Voice Port 140
- Information 141
- Dial Peer 142
- IP Cloud 143
- Destination 143
- - 145 / 416 145
- - 146 / 416 146
- - 147 / 416 147
- - 148 / 416 148
- 3.3.4. Hunt Group 150
- - 151 / 416 151
- 3.3.4.2. Rerouting to PSTN 152
- 3.3.4.3. Call bar 153
- - 154 / 416 154
- - 155 / 416 155
- Gateway 155
- - 156 / 416 156
- - 157 / 416 157
- - 158 / 416 158
- - 159 / 416 159
- - 160 / 416 160
- - 161 / 416 161
- 3.3.8.1. call-diversion 162
- 3.3.8.2. max-forward-hop 163
- - 164 / 416 164
- - 165 / 416 165
- - 166 / 416 166
- 3.3.12.1. busyout monitor 167
- 3.3.12.2. busyout action 167
- - 168 / 416 168
- - 169 / 416 169
- - 170 / 416 170
- - 171 / 416 171
- 60 PIN CONNECTOR 172
- RJ45_4PORT 172
- - 173 / 416 173
- - 174 / 416 174
- - 175 / 416 175
- 3.5.2. Common Configuration 176
- - 177 / 416 177
- 3.5.4. Configuring R2 178
- - 179 / 416 179
- - 180 / 416 180
- 3.7.1. ftp 181
- 3.7.2. http 181
- 3.7.3. ntp 182
- 3.7.4. snmp 182
- 3.7.5. telnet 183
- - 184 / 416 184
- - 185 / 416 185
- - 186 / 416 186
- - 187 / 416 187
- - 188 / 416 188
- - 189 / 416 189
- 3.10. VoIP Related commands 190
- 3.10.2.1.1. Syntax 196
- 3.10.2.1.2. Command Default 196
- 3.10.2.1.3. Command Modes 196
- 3.10.2.1.4. Usage Guidelines 196
- 3.10.2.1.5. Examples 196
- 3.10.2.2.1. Syntax 197
- 3.10.2.2.2. Command Default 197
- 3.10.2.2.3. Command Modes 197
- 3.10.2.2.4. Usage Guidelines 197
- 3.10.2.2.5. Examples 197
- 3.10.2.3.1. Syntax 198
- 3.10.2.3.2. Command Default 198
- 3.10.2.3.3. Command Modes 198
- 3.10.2.3.4. Usage Guidelines 198
- 3.10.2.3.5. Examples 198
- 3.10.2.4. dial-peer hunt 199
- 3.10.2.4.5. Examples 200
- 3.10.2.5.1. Syntax 201
- 3.10.2.5.2. Command Default 201
- 3.10.2.5.3. Command Modes 201
- 3.10.2.5.4. Usage Guidelines 201
- 3.10.2.5.5. Examples 201
- - 202 / 416 202
- * 10 * 0 * 0 * 1 * 1234 # 202
- * 10 * 0 * 0 * 1 # 202
- - 203 / 416 203
- 3.10.2.7. dial-peer voice 204
- 3.10.2.8. gateway 205
- 3.10.2.9. num-exp 206
- 3.10.2.9.1. Syntax 207
- 3.10.2.9.2. Command Default 207
- 3.10.2.9.3. Command Modes 207
- 3.10.2.9.4. Usage Guidelines 207
- 3.10.2.10. translation-rule 209
- 3.10.2.11. voice-port 210
- - 211 / 416 211
- 3.10.2.12.2. Command Default 212
- 3.10.2.12.3. Command Modes 212
- 3.10.2.12.5. Examples 212
- - 213 / 416 213
- 3.10.2.13.1. Command Default 214
- 3.10.2.13.2. Command Modes 214
- 3.10.2.13.4. Examples 214
- - 215 / 416 215
- 3.10.2.14.1. Syntax 216
- 3.10.2.14.2. Command Default 216
- 3.10.2.14.3. Command Modes 216
- 3.10.2.14.5. Examples 217
- 3.10.2.15.1. Syntax 218
- 3.10.2.15.2. Command Default 218
- 3.10.2.15.3. Command Modes 218
- - 219 / 416 219
- 3.10.2.15.5. Examples 220
- 3.10.2.16. voice service 221
- 3.10.2.17. voip-interface 222
- 3.10.3.1. announcement 223
- 3.10.3.2. busyout action 224
- 3.10.3.3. busyout backup 225
- 3.10.3.4. caller-id 226
- - 227 / 416 227
- caller-id enable 227
- caller-id type bellcore 227
- 3.10.3.5. comfort-noise 228
- 3.10.3.6. connection plar 229
- - 230 / 416 230
- 3.10.3.7. connection trunk 231
- - 232 / 416 232
- 3.10.3.8.1. Syntax 233
- 3.10.3.8.2. Command Default 233
- 3.10.3.8.3. Command Modes 233
- 3.10.3.8.4. Usage Guidelines 233
- 3.10.3.8.5. Examples 233
- 3.10.3.9. did 234
- 3.10.3.9.5. Examples 235
- 3.10.3.10. echo-cancel 236
- 3.10.3.11. fax-early-detect 237
- 3.10.3.12. high-dtmf-gain 238
- 3.10.3.13. input gain 239
- 3.10.3.13.5. Examples 240
- 3.10.3.14. low-dtmf-gain 241
- 3.10.3.15. output gain 242
- 3.10.3.15.5. Examples 243
- 3.10.3.16. polarity-inverse 244
- 3.10.3.17. pstn-backup-port 245
- 3.10.3.17.5. Examples 246
- 3.10.3.18. ring number 247
- 3.10.3.18.5. Examples 248
- 3.10.3.19.1. Syntax 249
- 3.10.3.19.2. Command Default 249
- 3.10.3.19.3. Command Modes 249
- 3.10.3.19.5. Examples 249
- 3.10.3.20. timeout 250
- 3.10.3.20.5. Examples 251
- 3.10.3.21.1. Syntax 252
- 3.10.3.21.2. Command Default 252
- 3.10.3.21.3. Command Modes 252
- 3.10.3.21.5. Examples 252
- - 253 / 416 253
- rule 1 8 878 253
- 3.10.4.1. answer-address 254
- 3.10.4.1.5. Examples 255
- 3.10.4.2. codec 256
- 3.10.4.2.5. Examples 257
- 3.10.4.3.1. Syntax 258
- 3.10.4.3.2. Command Default 258
- 3.10.4.3.3. Command Modes 258
- 3.10.4.3.4. Usage Guidelines 258
- 3.10.4.3.5. Examples 258
- 3.10.4.4.1. Syntax 259
- 3.10.4.4.2. Command Default 259
- 3.10.4.4.3. Command Modes 259
- 3.10.4.4.4. Usage Guidelines 259
- 3.10.4.4.5. Examples 260
- 3.10.4.5. diversion 261
- 3.10.4.6. display-name 262
- - 263 / 416 263
- user-name addpac_user 263
- display-name addpac_user 263
- 3.10.4.7. dtmf-relay 264
- 3.10.4.7.5. Examples 265
- 3.10.4.8. forward-digits 266
- 3.10.4.8.5. Examples 267
- 3.10.4.9. huntstop 268
- 3.10.4.10. port 269
- 3.10.4.11. preference 270
- - 271 / 416 271
- 3.10.4.12. prefix 272
- 3.10.4.13. register 273
- 3.10.4.13.5. Examples 274
- 3.10.4.14. session target 275
- 3.10.4.15.1. Syntax 276
- 3.10.4.15.2. Command Default 276
- 3.10.4.15.3. Command Modes 276
- 3.10.4.15.5. Examples 276
- 3.10.4.16. sid 277
- 3.10.4.17.1. Syntax 278
- 3.10.4.17.2. Command Default 278
- 3.10.4.17.3. Command Modes 278
- 3.10.4.17.5. Examples 278
- - 279 / 416 279
- 3.10.4.18. vad 280
- 3.10.4.19.1. Syntax 281
- 3.10.4.19.2. Command Default 281
- 3.10.4.19.3. Command Modes 281
- 3.10.4.19.5. Examples 281
- 3.10.4.20. user-name 282
- 3.10.4.20.5. Examples 283
- 3.10.4.21. user-password 284
- - 285 / 416 285
- 3.10.4.22.1. Syntax 286
- 3.10.4.22.2. Command Default 286
- 3.10.4.22.3. Command Modes 286
- 3.10.4.22.5. Examples 287
- 3.10.4.23. call-wafting 288
- - 289 / 416 289
- 3.10.4.24. out-barred-group 290
- - 291 / 416 291
- 3.10.5.1.1. Syntax 292
- 3.10.5.1.2. Command Default 292
- 3.10.5.1.3. Command Modes 292
- 3.10.5.1.4. Usage Guidelines 292
- 3.10.5.1.5. Examples 293
- 3.10.5.2. conference-server 294
- 3.10.5.3. enable-ping 295
- 3.10.5.3.5. Examples 296
- 3.10.5.4. media-channel 297
- 3.10.5.4.5. Examples 298
- 3.10.5.5. min-se 299
- 3.10.5.5.5. Examples 300
- 3.10.5.6. register 301
- 3.10.5.6.5. Examples 302
- 3.10.5.7. rel1xx 303
- - 304 / 416 304
- 3.10.5.9. retrycounter 305
- 3.10.5.10. remote-party-id 306
- 3.10.5.10.1. Syntax 307
- 3.10.5.10.2. Command Default 307
- 3.10.5.10.3. Command Modes 307
- 3.10.5.10.5. Examples 307
- 3.10.5.11. response 308
- 3.10.5.11.1. Syntax 309
- 3.10.5.11.2. Command Default 309
- 3.10.5.11.3. Command Modes 309
- 3.10.5.11.5. Examples 309
- 3.10.5.13. set-local-domain 310
- 3.10.5.13.1. Syntax 311
- 3.10.5.13.2. Command Default 311
- 3.10.5.13.3. Command Modes 311
- 3.10.5.13.5. Examples 311
- 3.10.5.14. set-local-host 312
- 3.10.5.14.5. Examples 313
- 3.10.5.15. signaling-port 314
- 3.10.5.16. force-forwarding 315
- 3.10.5.17. sip-server 317
- 3.10.5.17.5. Examples 318
- 3.10.5.18. sip-username 319
- 3.10.5.19. sip-password 320
- 3.10.5.20. srv 320
- 3.10.5.20.1. Syntax 321
- 3.10.5.20.2. Command Default 321
- 3.10.5.20.3. Command Modes 321
- 3.10.5.20.5. Examples 321
- 3.10.5.21. timeout 322
- 3.10.5.21.5. Examples 323
- 3.10.5.22. user-register 324
- 3.10.5.22.5. Examples 327
- 3.10.5.23.1. Syntax 328
- 3.10.5.23.2. Command Default 328
- 3.10.5.23.3. Command Modes 328
- 3.10.5.23.5. Examples 328
- Configuration Commands 329
- 3.10.6.1. announcement 329
- 3.10.6.2. busyout monitor 330
- 3.10.6.3. codec preference 331
- 3.10.6.4. counter 332
- 3.10.6.5. discovery 333
- 3.10.6.6. fax protocol 334
- - 335 / 416 335
- 3.10.6.7. fax rate 336
- 3.10.6.7.5. Examples 337
- 3.10.6.8.1. Syntax 338
- 3.10.6.8.2. Command Default 338
- 3.10.6.8.3. Command Modes 338
- 3.10.6.8.4. Usage Guidelines 338
- 3.10.6.8.5. Examples 338
- 3.10.6.9. force-starth245 339
- 3.10.6.10.1. Syntax 340
- 3.10.6.10.2. Command Default 340
- 3.10.6.10.3. Command Modes 340
- 3.10.6.10.5. Examples 340
- 3.10.6.11.1. Syntax 341
- 3.10.6.11.2. Command Default 341
- 3.10.6.11.3. Command Modes 341
- 3.10.6.11.5. Examples 341
- 3.10.6.12.1. Syntax 342
- 3.10.6.12.2. Command Default 342
- 3.10.6.12.3. Command Modes 342
- 3.10.6.12.5. Examples 343
- 3.10.6.13.1. Syntax 344
- 3.10.6.13.2. Command Default 344
- 3.10.6.13.3. Command Modes 344
- 3.10.6.13.5. Examples 345
- 3.10.6.14. max-frame 346
- 3.10.6.14.5. Examples 347
- 3.10.6.15. gkip 348
- 3.10.6.15.5. Examples 349
- 3.10.6.16. h323-id 350
- 3.10.6.17. lightweight-irr 351
- 3.10.6.18.1. Syntax 352
- 3.10.6.18.2. Command Default 352
- 3.10.6.18.3. Command Modes 352
- 3.10.6.18.5. Examples 353
- - 354 / 416 354
- - 355 / 416 355
- 3.10.6.20. max-digits 356
- 3.10.6.21. password 357
- 3.10.6.22. public-ip 358
- 3.10.6.23. register 359
- - 360 / 416 360
- 3.10.6.24. signaling-port 361
- 3.10.6.25. rule 362
- 3.10.6.25.5. Examples 363
- 3.10.6.26.1. Syntax 364
- 3.10.6.26.2. Command Default 364
- 3.10.6.26.3. Command Modes 364
- 3.10.6.26.4. Examples 364
- 3.10.6.27. acf-dest-info 365
- 3.10.6.28.1. Syntax 366
- 3.10.6.28.2. Command Default 366
- 3.10.6.28.3. Command Modes 366
- 3.10.6.28.5. Examples 367
- 3.10.6.29.1. Syntax 368
- 3.10.6.29.2. Command Default 368
- 3.10.6.29.3. Command Modes 368
- 3.10.6.29.5. Examples 368
- 3.10.6.30.1. Syntax 369
- 3.10.6.30.2. Command Default 369
- 3.10.6.30.3. Command Modes 369
- 3.10.6.30.5. Examples 369
- 3.10.6.31. timeout 370
- 3.10.6.31.3. Command Modes 371
- 3.10.6.31.5. Examples 371
- 3.10.6.32.1. Syntax 372
- 3.10.6.32.2. Command Default 372
- 3.10.6.32.3. Command Modes 372
- 3.10.6.32.5. Examples 372
- 3.10.6.33.1. Syntax 373
- 3.10.6.33.2. Command Default 373
- 3.10.6.33.3. Command Modes 373
- 3.10.6.33.5. Examples 373
- 3.10.6.34.1. Syntax 374
- 3.10.6.34.2. Command Default 374
- 3.10.6.34.3. Command Modes 374
- 3.10.6.34.5. Examples 375
- 3.10.6.35.1. Syntax 376
- 3.10.6.35.2. Command Default 376
- 3.10.6.35.3. Command Modes 376
- 3.10.6.35.5. Examples 376
- 3.10.7. Other Commands 377
- 3.10.7.1. clear h323 call 377
- 3.10.7.2. clear voice-port 378
- 3.10.7.3.1. Syntax 379
- 3.10.7.3.2. Command Default 379
- 3.10.7.3.3. Command Modes 379
- 3.10.7.3.4. Usage Guidelines 379
- 3.10.7.3.5. Examples 379
- 3.10.7.4.1. Syntax 380
- 3.10.7.4.2. Command Default 380
- 3.10.7.4.3. Command Modes 380
- 3.10.7.4.4. Usage Guidelines 380
- 3.10.7.4.5. Examples 380
- 3.10.7.5.1. Syntax 381
- 3.10.7.5.2. Command Default 381
- 3.10.7.5.3. Command Modes 381
- 3.10.7.5.4. Usage Guidelines 381
- 3.10.7.5.5. Examples 381
- 3.10.7.6.1. Syntax 382
- 3.10.7.6.2. Command Default 382
- 3.10.7.6.3. Command Modes 382
- 3.10.7.6.4. Examples 382
- 3.10.7.7. show dial-peer 383
- 3.10.7.8.1. Syntax 384
- 3.10.7.8.2. Command Default 384
- 3.10.7.8.3. Command Modes 384
- 3.10.7.8.4. Usage Guidelines 384
- 3.10.7.8.5. Examples 384
- 3.10.7.9.1. Syntax 385
- 3.10.7.9.2. Command Default 385
- 3.10.7.9.3. Command Modes 385
- 3.10.7.9.4. Usage Guidelines 385
- 3.10.7.9.5. Examples 385
- 3.10.7.10. show gateway 386
- 3.10.7.11. show num-exp 387
- 3.10.7.12.1. Syntax 388
- 3.10.7.12.2. Command Default 388
- 3.10.7.12.3. Command Modes 388
- 3.10.7.12.5. Examples 388
- 3.10.7.13. show user-class 389
- 3.10.7.14.1. Syntax 390
- 3.10.7.14.2. Command Default 390
- 3.10.7.14.3. Command Modes 390
- 3.10.7.14.5. Examples 390
- 3.10.7.15.1. Syntax 391
- 3.10.7.15.2. Command Default 391
- 3.10.7.15.3. Command Modes 391
- 3.10.7.15.5. Examples 391
- 3.10.7.16.1. Syntax 392
- 3.10.7.16.2. Command Default 392
- 3.10.7.16.3. Command Modes 392
- 3.10.7.16.5. Examples 392
- 3.10.7.17.5. Examples 394
- Appendix B References 400
- - 401 / 416 401
- - 402 / 416 402
- - 403 / 416 403
- - 404 / 416 404
- - 405 / 416 405
- - 406 / 416 406
- - 407 / 416 407
- - 408 / 416 408
- - 409 / 416 409
- - 410 / 416 410
- Examples are banks that 411
- - 412 / 416 412
- - 413 / 416 413
- - 414 / 416 414
- - 415 / 416 415
- - 416 / 416 416
Manuais e produtos relacionados com Gateways/controladores AddPac VoiceFinder AP1100
(68 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais